The seals do not function as bearing at the same time and are therefore more durable
The seal can be readjusted
The individual stirrer guide components are interchangeable
The bearing distance is very big, this ensures a good guidance
The lower bearing is led deep into the standard ground joint, this shortens the lever action of the agitator
NS |
stirrer shaft ø |
stirrer guide |
particle catcher |
29,2/32 | 8 mm | 3081123 | 3081223 |
29,2/32 | 10 mm | 3081125 | 3081225 |
45/40 | 10 mm | 3081140 | 3081240 |
45/40 | 13 mm | 3081142 | 3081242 |
45/40 | 16 mm | 3081143 | 3081243 |
Spare parts: |
|||
fig. 1 pressure ring |
|||
29,2/32 | 8mm | 3081156 | |
29,2/32 | 10mm | 3081161 | |
45/40 | 10mm | 3081171 | |
45/40 | 13mm | 3081176 | |
45/40 | 16mm | 3081181 | |
fig. 2 upper shaft bearings, complete with Viton O-ring in a set |
|||
29,2/32 | 8mm | 3081157 | |
29,2/32 | 10mm | 3081162 | |
45/40 | 10mm | 3081172 | |
45/40 | 13mm | 3081177 | |
45/40 | 16mm | 3081182 | |
fig. 3 sets of seals containing 3 seals each |
ring for
|
||
29,2/32 | 8mm | 3081168 | 3081268 |
29,2/32 | 10mm | 3081163 | 3081263 |
45/40 | 10mm | 3081173 | 3081273 |
45/40 | 13mm | 3081178 | 3081278 |
45/40 | 16mm | 3081183 | 3081283 |
fig. 4 spacer |
|||
29,2/32 | 8mm | 3081159 | |
29,2/32 | 10mm | 3081164 | |
45/40 | 10mm | 3081174 | |
45/40 | 13mm | 3081179 | |
45/40 | 16mm | 3081184 | |
fig. 5 lower shaft bearing |
|||
29,2/32 | 8mm | 3081160 | |
29,2/32 | 10mm | 3081165 | |
45/40 | 10mm | 3081175 | |
45/40 | 13mm | 3081180 | |
45/40 | 16mm | 3081185 | |
fig. 6 glass component separately |
|||
29,2/32 | 8-10mm | 3081166 | |
45/40 | 10-16mm | 3081186 |
Stirrer bearing complete
fig. 1 pressure ring for stirrer bearing
fig. 2 upper shaft bearings, complete with Viton O-ring
fig. 3 seal for stirrer bearing
fig. 4 spacer for stirrer bearing
fig. 5 lower shaft bearing for stirrer bearing
fig. 6 glass component for stirrer bearing
Particle catcher for stirrer bearing
© 2019 Glasatelier Saillart - All rights reserved