Available with fully automatic speed control.
The engines are also available in ATEX version.
Only 10% air consumption compared to standard motors.
Type | Torque | L1 | L2 | L3 | L4 | L5 | L6 | L8 | L9 | D1 |
450 | 4-2 Nm | 78 | 52 | 50,5 | 3 | 18 | 16 | 10,6 | 25 | 99 |
900 | 8-3 Nm | 92,5 | 66,5 | 65 | 3 | 18 | 16 | 10,6 | 25 | 99 |
1800 | 16-2 Nm | 111 | 70 | 67,5 | 5 | 28 | 21,5 | 15,3 | 40 | 159 |
3600 | 32-3 Nm | 133 | 92 | 89,5 | 5 | 28 | 21,5 | 15,3 | 40 | 159 |
Type | D2 | D3 | D4 | D5 | D6 | D7 | D8 | D9 | D10 | D11 |
450 | 14h6 | M4 x 12 | M6 x 0,75 x 8 | M4 x 9 | 67 | 55h6 | 40 | 28 | M5 x 5 | 87 |
900 | 14h6 | M4 x 12 | M6 x 0,75 x 8 | M4 x 9 | 67 | 55h6 | 40 | 28 | M5 x 5 | 87 |
1800 | 19h6 | M6 x 18 | R1/8 x 9 | M6 x 10 | 115 | 95h6 | 40 | 35 | M5 x 5 | 140 |
3600 | 19h6 | M6 x 18 | R1/8 x 9 | M6 x 10 | 115 | 95h6 | 40 | 35 | M5 x 5 | 140 |
Compressed air stirring motor for reactors with small mounting dimensions
Compact compressed air stirring motor
Compact stirring motor with controller
Drawing 1 compressed air stirring motor
Drawing 2 compressed air stirring motor
Drawing 3 compressed air stirring motor
Compressed air stirrer with screw thread connection for barrel type AFR 64 (fig. 1)
AFR series stirrers are specially designed for the use with DIN standard industrial drums. They may be screwed directly into the 2″ bunghole by means of the AFR adapter.
Type | AFR 64/160-V | AFR 64/65-V | AFR 64/30-V |
Power rating W | 640 | 640 | 640 |
Volume max. l | 200 | 200 | 200 |
Viscosity approx. mPa/s | 20000 | 50000 | 100000 |
Idling speed rpm | 2600 | 1300 | 580 |
Load speed rpm | 1300 | 650 | 290 |
Load torque Nm | 4.7 | 9.4 | 21 |
Order No. | 10 14 55030 | 10 14 55047 | 10 14 55054 |
Suitable stirring rotor is BuddeMix SW 4: see accessories.
Read more about Buddeberg compressed air stirrers in our shop.
AFR 64 industrial pneumatic stirring motor (fig. 1)
AFR 64 pneumatic stirring motor mounting dimensions
AFR 64 pneumatic stirring motor mounted on barrel
Type | BSR 64/160-V | BSR 64/65-V | BSR 64/30-V |
Power rating W | 640 | 640 | 640 |
Volume max. l | 200 | 200 | 200 |
Viscosity approx. mPa/s | 20000 | 50000 | 100000 |
Idling speed rpm | 2600 | 1300 | 580 |
Load speed rpm | 1300 | 650 | 290 |
Load torque Nm | 4.7 | 9.4 | 21 |
Order No. | 10 14 54941 | 10 14 54958 | 10 14 54965 |
Connection coupling VK 14 required.
Connection coupling required to connect motor and stirring shaft. All types made from stainless steel grade 1.4404.
Article | Order No. |
VK 14 × 10 mm | 10 14 57058 |
VK 14 × 12 mm | 10 14 56471 |
VK 14 × 14 mm | 10 14 57447 |
VK 14 × 20 mm | 10 14 50790 |
Additional sizes available on request.
BSR 64 industrial pneumatic agitator with floor stand (fig. 2)
BSR 64 industrial pneumatic agitator with floor stand, dimensions
Mounting example for BSR 64-V
Coupling piece for stirrer with stirring shaft VK (fig. 3)
The 3-blade propellers produce axial flow, and reduce shear forces to a minimum, even at high stirring speeds, thanks to their optimised blade design. Recommended for medium to high speed operations. Model type PR 4 as screw design.
This stirres creates a radial flow with high turbulence. The mixture is drawn from top to bottom. High shear forces are created at the dissolver disk, which provides effective particle reduction. Recommended for medium to high speed operations.
These stirres create inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. This means gentle, low-shear stirring at slow stirring speed.
This centrifugal stirrer is specially designed for the use with industrial drums and containers. Foldable stirrers available for bunghole openings of 2″ to 150 mm.
Type | Ø Stirrer mm |
Ø Shaft mm |
Wave length mm |
Order No. | |
(4) | PR 4 (screw) | 140 | 10 | 850 | 10 14 51261 |
PR 9 | 100 | 14 | 850 | 10 14 51339 | |
PR 11 | 150 | 14 | 1000 | 10 14 51353 | |
(5) | DS 9 | 150 | 14 | 1000 | 10 14 51513 |
DS 10 | 200 | 20 | 1000 | 10 14 51520 | |
(6) | BuddeMix 6 | 170 | 12 | 550 | 10 14 55290 |
BuddeMix 7 | 210 | 14 | 850 | 10 14 55306 | |
(7) | BuddeMix SW 4 | 300/44 | 14 | 750 | 10 14 55740 |
PR 4 propellor stirrer stainless steel (fig. 4)
Dissolver Stirrer Stainless Steel DS (fig. 5)
BuddeMix 6 stirrer (fig. 6)
BuddeMix SW 4 centrifugal stirring shaft (fig. 7)
© 2019 Glasatelier Saillart - All rights reserved